Patio cover installation in Oak Hills CA - shade you'll use every afternoon

If your patio bakes in afternoon sun and sits empty, we'll build a cover that suits how it faces and how you use it.

Screened patio enclosure beneath a solid cream cover, attached to a brick house with a lawn and flower beds.
Service
Patio cover installation

How do you know your patio needs a cover?

  • Patio too hot to use

    If the concrete is too hot for bare feet by mid-afternoon and the chairs sit empty, the patio is usually taking full sun with nothing overhead. Every summer you wait is another season of a space you paid for and don't use.

  • Old cover sagging or leaking

    Gray, split boards, gaps letting sun through, or water dripping onto the slab usually mean an old wood cover that hasn't been sealed in a while. If you leave it, the rot tends to work into the posts and the spot where the cover meets the house wall, and a simple replacement turns into a bigger repair.

  • Furniture fading and cracking

    Bleached cushions and brittle plastic chairs mean the sun hits that patio for most of the day. Without shade you'll keep replacing them, and your grill and outdoor gear wear out faster too.

What goes into a patio cover in Oak Hills?

Patio cover installation in Oak Hills means building a solid or lattice roof over your patio, either attached to your house or standing on its own, so you get shade and can use the space through the hot months. It's the simplest way to get more use out of a patio without closing it in.

Most people who call us have a patio they'd use more if it weren't so exposed, and the fix is usually shade that fits how the patio sits. The price mostly turns on the size, a solid roof or lattice, aluminum or wood, and whether the cover attaches to the house or stands on its own. The schedule turns mostly on the permit and on getting materials in, so we check whether your address falls under the county or a city office and pull the permit when your job needs one. Your estimate spells out what's in the job, so you know exactly what you're paying for before we start.

Details to note before an estimate

  • Rough size of the patio
  • Which way the patio faces
  • Solid roof or lattice preference
  • Attached to the house or freestanding

How we handle patio cover installation

Before I suggest solid or lattice, I look at which way your patio faces and how you use it. A west-facing patio takes the hottest afternoon sun and usually does best under a solid roof or a louvered pergola, while an east-facing one gets soft morning light that lattice or an open pergola handles well. Then we talk through aluminum against wood. Aluminum is common out here because termites can't eat it and it needs almost no care. Wood looks warmer but needs sealing now and then and can draw termites, so you're trading upkeep for the look. Once the plan is set, our installers set the posts, fasten the cover to the house wall or build it to stand on its own, frame and roof it, and slope it so water runs off instead of sitting. I check in along the way to make sure it goes together the way we planned it.

A cover is often the first step for a patio. If you think you'll want walls out there someday, we can start with sunroom design so the cover and any future room get planned together. If you already know you want a closed-in space, vinyl sunrooms give you walls and glass instead of open sides.

  • Sunroom design

    Plan the layout, glass and roof of a future room before anything gets built, so each piece fits the next.

  • Vinyl sunrooms

    A closed-in room with low-upkeep vinyl framing, for when shade alone won't keep you out on the patio as much as you'd like.

What happens after you call about a patio cover?

  1. Call or send a request

    Call (760) 490-0317 or use the form, and we'll set a time for me to come out to your house. I look at every job myself.

  2. I measure and write it up

    I measure the patio, look at the slab and the house wall, and answer your questions until the plan makes sense. Your estimate lists the cover type, material, size and permit work, so nothing is left to guess.

  3. We handle permit and materials

    Once you say yes, we line up the permit and order materials. The county reviews the plans against the building and fire codes before construction can start, so that review usually sets the start date.

  4. We build, inspect and walk it

    Our installers build the cover with me checking in, with inspections where they belong. When it's done, we walk it with you and read the plan back so nothing gets missed.

Questions before you book a patio cover

How much does a patio cover cost in Oak Hills?

Solid patio covers across the US usually cost about $20 to $60 per square foot installed, and that's a national figure, not our price. Insulated aluminum usually lands in the upper part of that range, and solid wood can run well past the top, so the material you pick shapes the final number. Your estimate spells out your own figure, and the work is backed by our satisfaction guarantee.

Do I need a permit for a patio cover in Oak Hills?

Most likely yes, because San Bernardino County lists patio covers, solid and lattice, among the work that needs a permit. The county's accessory structure page ties that permit to structures over 120 square feet, so we look at both against your plan, and setbacks have to be kept whether a permit is required or not. Applications go through the county's online permitting portal, and we take care of that part for you.

Should I get a solid or lattice patio cover?

Go solid if you plan to use the patio every day, since a solid roof blocks sun and rain completely. Lattice lets light through in patches, and how much shade you get depends on the slat spacing and which way the slats run, so it suits people who like some sun coming through.

What license should a patio cover installer have in California?

For aluminum, metal, vinyl or canvas patio covers, attached or freestanding, look for a California D-3 awnings contractor, the classification that covers installing, modifying and repairing them. That classification doesn't include patio enclosures or carports, and lattice covers attached to the house can also be built by a B general building, C-5 framing or C-27 landscaping contractor. If a C-27 contractor bids your job, ask whether the cover will be watertight, because they can contract and pull permits for covers that aren't. We're licensed and insured.

How do I make sure a patio cover holds up to wind and snow in Oak Hills?

Build it to the wind speed and snow load design values San Bernardino County sets for your community. The county has also mapped fire hazard severity zones, so we check where your lot falls before the design and materials are final. We work across the High Desert and the cities around it, so designing to these county rules is a normal part of our jobs.

How long does a patio cover installation take in Oak Hills?

Most of the wait usually comes before the build, while the permit and materials get lined up, and the building goes quicker once it starts. I'll give you the best read I have at the estimate, and if I don't know yet, I'll say so and find out.

Get your patio cover plan started

We answer (760) 490-0317 seven days a week from 6 AM to 11 PM, so call when it suits you or send the form.